ESC Z Sheet Piles

Z PROFILE SHEET PILES

Z hot rolled sheet piles have a continuous, symmetrical interlock on both sides of the neutral axis. Both aspects have a positive influence on the sections, as they are located at a considerable distance from the neutral axis. This ensures and increase in strength for a wide variety of applications.

ESC Steel Philippines is able to offer the Philippines market with a combination of both stock in standard sections and lengths and also made to order sizes for medium to large projects.

Request a Quote

ESC-HRZ Hot Rolled Z Piles

Section Modulus Range

1250-5160cm3/m

Width Range (single)

700-7700mm

Thickness Range

8.5-24mm

Production Standards

BS EN 10248

Steel Grades

S355GP, S430GP
ASTM A572 Gr50, Gr60
Others may be available on request

Length

35.0m maximum but any project specific length can be produced

Delivery Options

Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
Grip Plate
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings

Corner Piles

ESC can provide connectors or custom corner piles for various applications

ESC-CRZ Cold Formed Z Piles

Box Pile Option 1

Box Pile Option 1 Combi Wall

Box Pile Option 2 Combi Wall

Box Pile Option 1

1/4

Other Configurations

CRZ sheet piles can be fabricated to high modulus box piles, which can be used either in isolation or in a combi wall arrangement.

Section Modulus Range

1100-5000cm3/m

Width Range (single)

580-800mm

Thickness Range

5-16mm

Production Standards

BS EN 10249 Part 1 & 2

Steel Grades

S235JR, S275JR, S355JR, S355JO
ASTM A572 Gr42, Gr50, Gr60
Q235B, Q345B, Q345C, Q390B, Q420B
Others available on request

Length

35.0m maximum but any project specific length can be produced

Delivery Options

Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
Grip Plate
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings

Corner Piles

ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRZ Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on corner pile location. Option 3 provides an option where no welding is required. Option 3 provides increased accuracy at corners that are deviated from the typical 90˚ corner.