How to Select the Correct Mooring Bollard Capacity

Selecting the correct mooring bollard capacity is essential for the safety and reliability of any berthing facility. For ports, jetties, wharves, terminals and other marine facilities in the Philippines, bollards must safely withstand the forces transferred through a vessel’s mooring lines and into the supporting structure.
Bollard capacity should not be selected based on vessel size or deadweight tonnage alone. The correct capacity depends on the design vessel, environmental loads, mooring arrangement, line angles, operating conditions and structural capacity of the berth.
The goal is to select a bollard type and rated capacity that suit the actual project conditions.
Understanding Mooring Bollard Capacity
Mooring bollard capacity represents the load that a bollard system is designed to resist under specified conditions. However, the bollard is only one part of the complete load path:
Each component must safely transfer the required design forces. A correctly rated bollard does not guarantee an adequate mooring point if the anchor system, foundation or supporting structure cannot resist the same loads.
ESC Steel Philippines offers cast iron and steel bollards in various sizes, grades and capacities, including bollards manufactured to PPA designs and standards. ESC's bollards are also designed and manufactured with reference to international standards and guidance such as BS 6349 Part 4 and PIANC guidelines.
Start with the Design Vessel and Site Conditions
Bollard selection begins with understanding the vessels expected to use the berth. Vessel type, displacement or DWT, length overall, beam, draft, freeboard and mooring arrangement all help determine the expected loads.
DWT can provide an indication of vessel size, but it should not be used alone to determine bollard capacity.
Environmental conditions are equally important. Wind, current, waves, swell and tidal forces can influence vessel movement and mooring-line loads. Changes in vessel draft during loading and unloading can also alter mooring-line geometry. These conditions should be assessed using project-specific data and the applicable design criteria.
Where a berth accommodates different vessel classes, the mooring system should be evaluated against the governing design condition.
Consider Mooring Arrangement and Line Angles
The arrangement of head lines, stern lines, breast lines and spring lines determines how vessel forces are distributed between individual mooring points.
Bollard spacing, vessel fairlead positions and horizontal and vertical line angles can significantly affect the forces acting on a bollard. For this reason, bollard type and capacity should be considered together.
ESC Steel Philippines offers several configurations, including Tee-Head, T-Head, T-Horn, Kidney, Cleat, Double Bitt, Single Bitt and Pillar bollards, as well as PPA-standard Tee-Head models.
ESC's published guidance indicates that its bollards can accommodate horizontal line angles of up to ±90°, except Pillar Bollards which accommodate all horizontal angles, and vertical angles up to 60°, depending on bollard type.
Determine the Required Bollard Capacity
Once the design vessel, environmental forces and mooring arrangement have been established, the resulting loads can be assessed to determine the demand at each mooring point.
The selected rating should consider the governing mooring-line load, load distribution, horizontal and vertical force components, applicable design factors and expected operating conditions.
While approximate vessel displacement-to-bollard capacity guidelines can be useful during preliminary planning, ESC Steel Philippines recommends calculating actual mooring loads where possible. Its published guidance also notes that bollard capacity should be increased by 25% or greater where a berth is expected to experience adverse weather conditions.
Final bollard capacity should therefore be based on project-specific engineering analysis and applicable design requirements, rather than simply matching vessel tonnage to a standard bollard size.
Verify the Foundation and Anchoring System
Selecting the correct bollard capacity is only part of the design. The anchor bolts, foundation and supporting quay, jetty, dolphin or deck must also be capable of safely transferring the design loads.
This becomes particularly important when upgrading an existing facility. Replacing an existing bollard with a higher-capacity model does not automatically increase the capacity of the complete mooring point. The anchoring system and supporting structure must also be checked.
Material and Corrosion Protection
Mooring bollards operate in demanding marine environments where saltwater, moisture, corrosion and mechanical wear can affect long-term performance.
Material selection and protective coatings should therefore be considered together with bollard capacity and geometry.
ESC Steel Philippines offers ductile cast iron and cast steel bollards, with material options referencing standards including BS EN 1563, ASTM A536 and ASTM A148. Factory-standard protective coatings are available, while high-performance epoxy and other specified coating systems can also be applied depending on project requirements.
Selecting Mooring Bollards for Projects in the Philippines
Selecting the correct mooring bollard requires more than choosing a capacity based on vessel size. The design vessel, environmental conditions, mooring configuration, line geometry, anchoring system and supporting structure all influence the final selection.
ESC Steel Philippines provides mooring bollard systems for marine applications alongside marine fenders, sheet piling, pipe piling and other port and marine infrastructure solutions. Its range includes standard and PPA-design bollards suitable for jetties, wharves, berths, dolphins, ports and harbors.
Providing vessel information, berth drawings, environmental design conditions, required capacity and applicable standards can help establish the appropriate bollard solution for a project.
✉️ philippines@escpile.com 📞 ᴍᴀɴɪʟᴀ +632 8526 8839 📱 +63 920 504 3801






