ESC Z Sheet Piles
Z PROFILE SHEET PILES
Z hot rolled sheet piles have a continuous, symmetrical interlock on both sides of the neutral axis. Both aspects have a positive influence on the sections, as they are located at a considerable distance from the neutral axis. This ensures and increase in strength for a wide variety of applications.
ESC Steel Philippines is able to offer the Philippines market with a combination of both stock in standard sections and lengths and also made to order sizes for medium to large projects.
ESC-HRZ Hot Rolled Z Piles
Section Modulus Range
1250-5160cm3/m
Width Range (single)
700-7700mm
Thickness Range
8.5-24mm
Production Standards
BS EN 10248
Steel Grades
-
S355GP, S430GP
-
ASTM A572 Gr50, Gr60
-
Others may be available on request
Length
35.0m maximum but any project specific length can be produced
Delivery Options
-
Single or Pairs
-
Pairs either loose, welded or crimped
-
Lifting Hole
-
Grip Plate
-
By container (11.8m or less) or Break Bulk
-
Corrosion Protection Coatings
Corner Piles
ESC can provide connectors or custom corner piles for various applications
ESC-CRZ Cold Formed Z Piles
Other Configurations
CRZ sheet piles can be fabricated to high modulus box piles, which can be used either in isolation or in a combi wall arrangement.
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
-
S235JR, S275JR, S355JR, S355JO
-
ASTM A572 Gr42, Gr50, Gr60
-
Q235B, Q345B, Q345C, Q390B, Q420B
-
Others available on request
Length
35.0m maximum but any project specific length can be produced
Delivery Options
-
Single or Pairs
-
Pairs either loose, welded or crimped
-
Lifting Hole
-
Grip Plate
-
By container (11.8m or less) or Break Bulk
-
Corrosion Protection Coatings
Corner Piles
ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRZ Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on corner pile location. Option 3 provides an option where no welding is required. Option 3 provides increased accuracy at corners that are deviated from the typical 90˚ corner.
Drawings
Product Images
.jpeg)
Related Products
