top of page
Hot Rolled Sheet pile in Philippines, more than 1000mT booked across various customers nat

ESC HOT ROLLED U SHEET PILES
Inventory - Readily Available in Philippines

U PROFILE SHEET PILES

The Hot Rolled U Sheet Pile was produced over 90 years ago  and millions of tons of it have been used globally. The thicker  rolled flange and interlock design enable multiple reusage making Hot Rolled U Sheet Piles a common choice for temporary works.  Utilising various profile and interlock designs, ESC is able to offer stock and made-to-order Hot Rolled U Sheet Piles available from various countries in the world. With stock available in ESC facilities in China and UAE ESC is able to respond to urgent customer requests in a timely fashion at competitive prices.

ESC-HRU Hot Rolled Sheet Piles

Hot rolled U sheet pile profile
Suitable Applications

ESC Hot Rolled U Sheet Piles - can be used for a multitude of applications and configurations such as:​

  • Revetment works​

  • Temporary & Permanent Retaining Wall

  • Flood Levees

  • Cutoff Wall

  • Quay Walls for Ports

  • Embankments

  • Breakwaters

  • Cofferdams

  • & More

Also commonly known as FSP II, FSP III, FSP IV, FSP 2, FSP 3, FSP 4

Section Modulus Range

​874-3820cm3/m

Width Range (single)

400-600mm

Thickness Range

10.3-27.6mm

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades
  • SY295, SY390 & S355GP for Type II to Type VIL

Length

27.0m maximum

Standard Stock Lengths of 6m, 9m, 12m, 15m

Delivery Options
  • Single or Pairs

  • Pairs either loose, welded or crimped

  • Lifting Hole

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

Box Piles can be fabricated out of individual U sections to boost the Moment Capacity of the wall without changing the pile profile. Corners and junctions can be implemented using either a welded interlock or slicing a profile and welding it to the end profile.

ESC-CRU Hot Rolled Sheet Piles

Other Configurations

ESC-CRU Series Sheet Piles can be combined to create special arrangements. These combined sections presented can greatly amplify the bending strength of a single section by over 5 times. Box Piles with intermediate standard U Piles can be designed. The welded box section can also be incorporated along a certain section of the length where the bending moments are the highest. Please contact our engineering department at engineering@escpile.com if you would like to receive more information about the presented combined pile systems.

Section Modulus Range

​1100-5000cm3/m

Width Range (single)

​580-800mm

Thickness Range

​5-16mm

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades
  • Q235B, Q345B, Q345C, Q390B, Q420B

  • S235JR, S275JR, S355JR, S355JO

  • ASTM A572 Gr42, Gr50, Gr60

  • Others available on request

Length

35.0m maximum

Any project specific length can be produced

Delivery Options
  • Single or Pairs

  • Pairs either loose, welded or crimped

  • Lifting Hole

  • Grip Plate

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRU Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on  corner pile location. Option 3 provides an option with no welding required and provides increased accuracy at corners that are deviated from the typical 90˚ corner.

Product Images

Product Photos

Contact ESC - Inquiry Form

bottom of page