Z Sheet Piles supply

ESC Z Sheet Piles

Z PROFILE SHEET PILES

Z hot rolled sheet piles have a continuous, symmetrical interlock on both sides of the neutral axis. Both aspects have a positive influence on the sections, as they are located at a considerable distance from the neutral axis. This ensures and increase in strength for a wide variety of applications.

ESC Steel Philippines is able to offer the Philippines market with a combination of both stock in standard sections and lengths and also made to order sizes for medium to large projects. 

ESC-HRZ Hot Rolled Z Piles

Hot rolled Z sheet pile profile
Section Modulus Range

​1250-5160cm3/m

Width Range (single)

700-7700mm

Thickness Range

8.5-24mm

Production Standards

​BS EN 10248

​Steel Grades
  • S355GP, S430GP

  • ASTM A572 Gr50, Gr60

  • Others may be available on request

Length

35.0m maximum but any project specific length can be produced

Delivery Options
  • Single or Pairs

  • Pairs either loose, welded or crimped

  • Lifting Hole

  • Grip Plate

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

ESC can provide connectors or custom corner piles for various applications
 

Hot rolled sheet pile manufacturer
Hot Rolled Z Sheet Piles

ESC-CRZ Cold Formed Z Piles

Cold formed Z sheet pile profile
Section Modulus Range

​1100-5000cm3/m

Width Range (single)

​580-800mm

Thickness Range

​5-16mm

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades
  • S235JR, S275JR, S355JR, S355JO

  • ASTM A572 Gr42, Gr50, Gr60

  • Q235B, Q345B, Q345C, Q390B, Q420B

  • Others available on request

Length

35.0m maximum but any project specific length can be produced

Delivery Options
  • Single or Pairs

  • Pairs either loose, welded or crimped

  • Lifting Hole

  • Grip Plate

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRZ Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on  corner pile location. Option 3 provides an option where no welding is required. Option 3 provides increased accuracy at corners that are deviated from the typical 90˚ corner.
 

Option 1
Option 1

Option 2
Option 2

Option 3
Option 3

Option 1
Option 1

1/3
Box Pile Option 1
Box Pile Option 1

Box Pile Option 1 Combi Wall
Box Pile Option 1 Combi Wall

Box Pile Option 2 Combi Wall
Box Pile Option 2 Combi Wall

Box Pile Option 1
Box Pile Option 1

1/4
Other Configurations

CRZ sheet piles can be fabricated to high modulus box piles, which can be used either in isolation or in a combi wall arrangement​.
 

 

Drawings 

Connectors
Connectors
Fabricated Corner Piles
Fabricated Corner Piles
Box Pile Fabrication
Box Pile Fabrication
Pipe Pile with Interlocks
Pipe Pile with Interlocks

Related Products